GeM
GeM portal MP: Madhya Pradesh's GeM tenders, what they ask and how to qualify
GeM portal MP: what Madhya Pradesh buyers buy on GeM, what bid documents ask, how to get past the technical stage, who wins and how to start selling.
By GovtTenderHub editorial teamUpdated 8 min read
On this page
In short
- "GeM portal MP" means the national GeM, gem.gov.in. GovtTenderHub counted 881 GeM bids from buyers in Madhya Pradesh published in the 90 days to 31 October 2026, and 294 open on 31 October.
- IT & Electronics was the biggest category (laptops, desktops, printers, interactive panels), then Furniture & Office and Food, Textiles & Supplies.
- Many bids ask for little: turnover in 35% of the MP bid documents we read, an ePBG in 19% (3% in the middle case), a reverse auction in only 3%. But just 6% relaxed experience and turnover for MSEs.
- Qualifying is the hard part: a typical result had 4 bidders and only 2 qualified sellers.
- MSEs won 57% of results that named a winner. The middle bid was open 16 days.
Madhya Pradesh's government buyers use GeM for computers, printers, stationery and other everyday goods. Search "GeM portal MP" and the bids you need are on the national Government e-Marketplace, gem.gov.in, posted by MP's buyers on the same BidPlus list as buyers across India. This guide uses GovtTenderHub's count of those bids to show what MP buyers order, what their bid documents ask, why so many bidders fall at the technical stage, and how to start.
What MP buyers buy on GeM
The 881 MP bids published in the 90 days to 31 October 2026 fell into these categories on GovtTenderHub:
- IT & Electronics: 232
- Furniture & Office: 156
- Food, Textiles & Supplies: 92
- Electrical & Power: 79
- Vehicles & Transport: 77
- Medical & Pharma: 54
Bids open on 31 October included entry and mid-level laptops with multifunction printers, a stationery set of registers, files, erasers and staplers, and OTR tyres. GovtTenderHub's IT and electronics tenders page lists more computer and printer work from other portals.
Among GeM results from MP buyers opened in the 120 days to 31 October 2026, repair, maintenance and installation of plant, systems and equipment came up most (20 results). Special purpose vehicles built on trucks or vans, copier paper, sports mats, e-carts and desktop computers each came up a few times.
GeM portal MP or mptenders.gov.in?
MP's state e-tenders are on mptenders.gov.in, an NIC portal where Urban Administration and Development, PWD Roads and Bridges and other state bodies publish. It needs Online Bidder Enrollment and a Class 3 DSC. Our MP e-tender guide covers it step by step.
GeM is a different system with its own free registration on gem.gov.in. There you can verify a bid with OTP, e-sign or a DSC, and GeM bid documents bar buyers from charging a tender fee. If you supply both works and goods in MP, you will likely need both accounts.
Finding GeM tenders in MP by department or district
- By buyer: in BidPlus advanced search, the Search by Ministry / Organization tab has a State box. Choose Madhya Pradesh, then an organisation or department.
- By district: the Search by Consignee Location tab finds bids with delivery to a city you pick, including central offices in MP.
- By bid number: type it in GeM's format, such as GEM/2026/B/1234567, to open one bid you were told about.
- On GovtTenderHub: filter GeM bids by state, district and category, or open Madhya Pradesh tenders to see GeM bids with mptenders.gov.in tenders in one list. Daily email alerts for one district are free with an account.
The middle MP bid was open 16 days from publishing to closing. That leaves time to get a new product approved, but not much to spare once you add document collection.
MP GeM tenders in numbers
GovtTenderHub's counts of GeM bids from buyers in Madhya Pradesh:
| Measure | MP buyers on GeM |
|---|---|
| Open on GovtTenderHub on 31 October 2026 | 294 |
| New in the 30 days to 31 October 2026 | 585 |
| Published in the 90 days to 31 October 2026 | 881 |
| Bids that asked for EMD | 47% |
| EMD amount, middle case | About ₹40,000 |
| Days open, middle bid | 16 |
| Bidders in a typical result | 4, of which 2 qualified |
Few MP bids state their value: only 36 of the 881 did, and the middle one of those was about ₹12.1 lakh. So you'll usually judge a bid's size from its quantity and items, not a stated figure. Just under half ask for EMD, and in a typical result only half the bidders qualified, so clean paperwork matters as much as a sharp price.
What MP bid documents ask for
Of the 846 MP bid documents GovtTenderHub read:
| Term in the bid | Share of bids (middle case) |
|---|---|
| Past experience | 67% (3 years) |
| Average annual turnover | 35% (₹5.0 lakh) |
| ePBG (performance security) | 19% (3%) |
| Reverse auction after the bid | 3% |
| Relaxation for MSEs | 6% |
| Relaxation for startups | 5% |
For experience to count, your past supplies, or your OEM's, must have gone to government bodies or PSUs in each of the years asked, and you need the contracts to prove them. Turnover is the average of your last three financial years, from audited accounts or a CA's certificate. The relaxation for MSEs or startups applies only where the bid's line says "Yes", which in MP is rare.
On EMD, GeM's terms ask for none below an estimated value of ₹5 lakh. Above that, MSEs with Udyam registration (for their own products or services only), DPIIT-recognised startups and sellers with a GeM vendor assessment can claim exemption; traders can't. A state buyer may limit the MSE exemption to MSEs of its own state, so check the EMD line and the additional terms (ATC). Our guide to reading a GeM bid document explains each line.
Getting through the technical stage
A typical MP result had 4 bidders but only 2 qualified sellers (middle values). We don't know why each seller was turned away, but GeM's terms and standard clauses list the usual grounds. Before you submit, check that:
- Every document is uploaded: each one under "Document required from seller", in the ATC and in any corrigendum. A standard clause makes an offer "liable to be rejected" if one is missing.
- No price appears in your technical bid. In a two-packet bid, that alone gets an offer rejected.
- Your product meets the specification. An equivalent or better one is allowed, but the buyer decides on merit.
- Your EMD claim is sound. A late physical instrument can lead to rejection, and traders can't claim the MSE exemption.
- No sister firm is bidding too. Bids from allied firms are all rejected and their EMD forfeited.
During evaluation, answer the buyer's queries within the "Time allowed for Technical Clarifications" in the bid, and log in daily: GeM makes checking notifications your job. If you are disqualified, you can raise one representation within 48 hours of the technical result. More on stages and results in tender status and results.
Prices and who wins MP GeM bids
With reverse auctions in only 3% of MP bids, and 813 of the 846 evaluated total value wise (31 item wise), the price in your bid is almost always the one that's ranked. GovtTenderHub tracked 849 GeM results from MP buyers opened in the 120 days to 31 October 2026:
- The winning (L1) price was, in the middle case, about 99% of the buyer's estimate, in the results where an estimate was shown. Few MP bids show one, and GeM bid documents say it has no bearing on the price to be quoted, so don't read it as a target.
- MSEs won 57% of results that named a winner.
- After ranking, the buyer may negotiate with L1, who has 72 hours to reply and can only lower the price. Where MSE purchase preference is on, an MSE inside the bid's price band can be offered L1's price.
Start selling to MP buyers on GeM
- Sign up on gem.gov.in, choosing Seller / Service Provider; there's no fee. Keep the signatory's Aadhaar or personal PAN, the firm's PAN, ITR details and a bank account ready. Steps: GeM registration.
- List the exact items MP buyers order, such as the laptop, desktop or stationery categories, and keep the OEM's authorisation if you resell a brand that needs it.
- Bid with your documents, EMD or exemption, and MSE declaration, and verify with OTP, e-sign or DSC. Full steps: how to bid on GeM.
Registering and bidding are free. GeM's charges start only when a financial year's orders cross ₹20 lakh: a one-time ₹10,000 + GST for that year, and 0.30% of any order above ₹10 lakh, never more than ₹3 lakh.
Common questions
What is GeM portal MP?
It's the national Government e-Marketplace, gem.gov.in, as used by Madhya Pradesh's government buyers. Their bids are listed on BidPlus with all other GeM bids. The state's own e-tender portal, mptenders.gov.in, is a separate system.
How do I find GeM tenders in MP by district?
Use Search by Consignee Location in BidPlus advanced search and pick Madhya Pradesh and your city. On GovtTenderHub, filter GeM bids by state and district.
Do I need experience to bid on MP GeM tenders?
In most bids, yes: 67% of the MP bid documents we read asked for it, 3 years in the middle case. Only 6% relaxed it for MSEs, so check the experience and relaxation lines before you prepare a bid.
Can I challenge a technical rejection in a GeM bid?
Yes, once. A disqualified seller sees the reasons and can raise one representation within 48 hours of the technical result, and the buyer must answer before opening the price bids.
Is GeM registration free for sellers in MP?
Yes. GeM charges no fee to register, list products or bid, and caution money was discontinued in 2025. It charges sellers only on orders they win, and only once their orders cross ₹20 lakh in a year.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.