GST
Delivery challan under GST: when to use one, Rule 55 and two filled samples
Delivery challan format under GST Rule 55: when you can use one, the details and three copies it needs, the e-way bill link, and two filled samples.
By GovtTenderHub editorial teamUpdated 12 min read
On this page
- What is a delivery challan?
- When you can use a delivery challan under GST (Rule 55)
- What a delivery challan must contain
- Delivery challan format: sample for material sent to a work site
- Sample delivery challan for job work
- Delivery challan and e-way bill
- When a delivery challan is not enough
- Job work challans: rules for the principal
- How to make a delivery challan in our accounting tool
- Common questions
In short
- A delivery challan is the paper that travels with goods when they move without a tax invoice. GST allows it only in the cases in Rule 55 of the CGST Rules 2017: goods sent for job work, goods moved for reasons other than a supply (your material going to your own work site, a machine going for repair), liquid gas whose quantity isn't known when it leaves, and other cases the CBIC notifies.
- It must show the challan number (up to 16 characters) and date, both parties' names, addresses and GSTINs, the HSN code, description, quantity and taxable value, the tax rate and amount where the goods are going for a supply, the place of supply for inter-State movement, and a signature.
- Make it in three copies: Original for consignee, Duplicate for transporter, Triplicate for consigner.
- A challan doesn't replace the e-way bill. You need one when the consignment is worth more than ₹50,000, even if nothing is sold, and for inter-State job work whatever the value (Rule 138).
- A sale needs a tax invoice. Where goods leave on a challan for a supply, the tax invoice follows after delivery (Rule 55(4)).
- Job-work challans are reported in Form GST ITC-04: every six months if last year's turnover was above ₹5 crore, otherwise once a year (Rule 45).
A delivery challan format is what you need when goods leave your godown but are not being sold yet: cement going to your own work site, steel going to a galvanising unit, a pump going for repair. Under GST, a delivery challan takes the place of the tax invoice for these movements, but only for the purposes the rules allow. This guide explains when you can use one, what it must contain, gives two filled samples for a contractor, and shows when a challan is not enough.
What is a delivery challan?
A delivery challan is a document the sender of goods (the consigner) issues to cover their movement when no tax invoice is issued. It tells the receiver (the consignee), the transporter and any officer who checks the vehicle what the goods are and where they are going.
Under GST it is a formal document. Rule 55 of the Central Goods and Services Tax Rules, 2017, headed "Transportation of goods without issue of invoice", lets the consigner issue a delivery challan "in lieu of invoice" in the cases it lists, and fixes what the challan must say.
A challan is not a bill: it doesn't ask for payment, and the receiver can't take input tax credit on it, because that needs a tax invoice or debit note from a registered supplier (Section 16(2)(a) of the CGST Act). It is not an e-way bill either; that is a separate online record, needed above a value limit.
When you can use a delivery challan under GST (Rule 55)
Rule 55(1) allows a delivery challan for:
- Supply of liquid gas where the quantity at the time of removal from the supplier's place of business is not known.
- Transportation of goods for job work, such as steel sent for cutting, bending or galvanising.
- Transportation of goods "for reasons other than by way of supply": the goods move, but nobody is buying them.
- Other supplies notified by the CBIC (the Central Board of Indirect Taxes and Customs).
Goods sent out on approval for sale have their own CBIC guidance, Circular No. 10/10/2017-GST, which lets them travel on a delivery challan with the e-way bill. Section 31(7) of the CGST Act then says the invoice is issued "before or at the time of supply or six months from the date of removal, whichever is earlier".
Here is how common movements fit:
| Movement | Fits Rule 55? | What follows |
|---|---|---|
| Your cement and steel to your own work site | Yes, not a supply | You bill the work, not the movement |
| Steel to a job worker for galvanising | Yes, job work | Goods come back; the job worker bills its charges |
| Pump or mixer sent for repair or testing | Yes, not a supply | Goods come back after repair |
| Goods sent to a buyer on approval | Yes, under the CBIC circular | Tax invoice on sale, within six months |
| Ordinary sale with known quantity and price | No | Tax invoice with the goods |
What a delivery challan must contain
Rule 55(1) lists nine details:
- Date and number of the challan. The number may be up to 16 characters, in one or more series, such as
AB/DC/26-27/041. - Name, address and GSTIN of the consigner, if registered.
- Name, address and GSTIN or UIN of the consignee, if registered. (UIN, the Unique Identity Number, is used by a few bodies instead of a GSTIN.)
- HSN code and description of the goods. HSN is the code number that classifies goods.
- Quantity, provisional where the exact quantity being supplied isn't known.
- Taxable value.
- Tax rate and tax amount (central tax, State tax, integrated tax, Union territory tax or cess), where the goods are being transported for a supply to the consignee.
- Place of supply, in case of inter-State movement.
- Signature.
Most firms also add the purpose, vehicle number, e-way bill number, an expected return date and a space for the receiver to sign. The rule doesn't ask for these, but they settle later disputes.
Three copies of the challan
Rule 55(2) says the challan is prepared in triplicate, marked:
- ORIGINAL FOR CONSIGNEE, which goes with the goods;
- DUPLICATE FOR TRANSPORTER, which the driver keeps;
- TRIPLICATE FOR CONSIGNER, which stays in your file.
Keep your copy signed by the receiver as proof of delivery.
Delivery challan format: sample for material sent to a work site
This sample is our own. A contractor in Lucknow sends cement and steel from its godown to its work site in Barabanki, both in Uttar Pradesh, under the same GST registration. The material goes into a works contract that the contractor bills to the department through running bills, so moving it to site is not a sale. The GSTINs are made-up examples.
[Contractor's letterhead]
DELIVERY CHALLAN · ORIGINAL FOR CONSIGNEE
Challan no.: AB/DC/26-27/041 Date: 28 October 2026
Consigner: ABC Builders, Plot 12, Chinhat Industrial Area, Lucknow, Uttar Pradesh. GSTIN 09AAAAA1111A1Z1 (example)
Consignee: ABC Builders (own site), site office, Government Inter College, Barabanki, Uttar Pradesh. GSTIN 09AAAAA1111A1Z1 (same registration)
Purpose: Material sent to work site for "Repair of Block B, Government Inter College, Barabanki", agreement no. ……… . Not a supply.
Vehicle no.: UP32 AB 1234 E-way bill no.: ……… (value above ₹50,000)
| Item and HSN | Quantity | Rate (₹) | Value (₹) |
|---|---|---|---|
| OPC 43 grade cement, 50 kg bags, HSN 2523 | 100 bags | 380 a bag | 38,000 |
| TMT bars Fe 500, 12 mm, HSN 7214 | 1.5 tonnes | 58,000 a tonne | 87,000 |
| Total value | 1,25,000 |
Tax: not charged. The goods are moving for a reason other than a supply.
Value in words: Rupees one lakh twenty-five thousand only.
For ABC Builders: (signature) ……… , Authorised signatory
Received at site in good condition: (name, signature, date) ………
Put a fair value on the goods, such as what you paid. The e-way bill limit is checked against it: ₹1,25,000 is above ₹50,000, so an e-way bill is needed before the truck leaves.
Sample delivery challan for job work
Now the same contractor sends steel angles for gates and railings to a galvanising unit in Lucknow, which will coat them and send them back. This is job work: the galvaniser works on goods that belong to the contractor (the principal).
DELIVERY CHALLAN FOR JOB WORK · ORIGINAL FOR CONSIGNEE
Challan no.: AB/JW/26-27/007 Date: 29 October 2026
Consigner (principal): ABC Builders, Plot 12, Chinhat Industrial Area, Lucknow, Uttar Pradesh. GSTIN 09AAAAA1111A1Z1 (example)
Consignee (job worker): XYZ Galvanisers, Talkatora Industrial Estate, Lucknow, Uttar Pradesh. GSTIN 09BBBBB2222B1Z2 (example)
Purpose: Job work: hot-dip galvanising. Goods to be returned to the consigner after processing.
Expected back by: 20 November 2026
| Item and HSN | Quantity | Rate (₹) | Value (₹) |
|---|---|---|---|
| MS angle 50 × 50 × 5 mm, HSN 7216 | 2,000 kg | 60 a kg | 1,20,000 |
| Total value | 1,20,000 |
Tax: not charged. Goods sent for job work.
Value in words: Rupees one lakh twenty thousand only.
For ABC Builders: (signature) ……… , Authorised signatory
Both firms are in Uttar Pradesh, so the ₹50,000 limit applies and ₹1,20,000 needs an e-way bill. Were the galvaniser in another state, one would be needed whatever the value. The galvaniser usually returns the goods on its own challan, with a tax invoice for its charges.
Delivery challan and e-way bill
Rule 55(3) says goods moving on a delivery challan must be declared as Rule 138, the e-way bill rule, requires. Under Rule 138:
- The limit: every registered person who causes goods to move, where the consignment value exceeds ₹50,000, gives the e-way bill details before the movement starts.
- Not only sales: it covers movement "in relation to a supply", "for reasons other than supply" and "due to inward supply from an unregistered person". Your material going to your own site counts.
- Job work across states: where a principal in one state sends goods to a job worker in another, the principal or the job worker (if registered) generates the e-way bill irrespective of the value. The same applies to some handicraft goods.
- The value: what is declared in the invoice, bill of supply or delivery challan, including GST and cess, leaving out exempt goods (Explanation 2).
- Exceptions: Rule 138(14) lists cases that need none, such as goods carried on a non-motorised conveyance.
When a delivery challan is not enough
A challan covers movement, not a sale. You need a tax invoice in these cases:
- An ordinary sale. Section 31(1) of the CGST Act requires a tax invoice for taxable goods before or at the time they are removed for supply, showing their description, quantity, value and the tax charged. Rule 46 lists the full details.
- Goods that left on a challan for a supply. Where the invoice couldn't be issued when the goods left, such as liquid gas of unknown quantity, "the supplier shall issue a tax invoice after delivery of goods" (Rule 55(4)).
- Government orders. On GeM, you must send a proper GST invoice with the goods; GeM's own online bill doesn't replace it. See the GeM order process.
Goods sent in parts or batches
Rule 55(5) covers a machine sent semi knocked down (SKD) or completely knocked down (CKD), or goods sent in batches or lots under one sale. You use both documents:
- Issue the complete tax invoice before the first consignment leaves.
- Issue a delivery challan for each later consignment, quoting that invoice.
- Send each consignment with its challan and a duly certified copy of the invoice.
- Send the original invoice with the last consignment.
The words "or in batches or lots" were added from 4 September 2018 (Notification No. 39/2018-Central Tax).
Job work challans: rules for the principal
Rule 45 adds a few duties when you send material for job work:
- Send the goods under your own challan, even when your supplier delivers them straight to the job worker. If one job worker passes them to another, either you or the sending job worker can issue it.
- Give the Rule 55 details on that challan.
- Report the challans in Form GST ITC-04. If your aggregate turnover in the previous financial year was above ₹5 crore, file it for each half-year (April to September and October to March); otherwise once a year. It is due by the 25th day of the month after the period, so 25 October for April to September, unless the Commissioner extends it. These periods apply from 1 October 2021 (Notification No. 35/2021-Central Tax).
- Get the goods back on time. Inputs or capital goods not returned within the time Section 143 of the CGST Act allows are treated as supplied by you to the job worker. You show that supply in GSTR-1 and pay the tax with interest (Rule 45(4)).
How to make a delivery challan in our accounting tool
If you bill on GovtTenderHub, delivery challans sit in the same accounting tool as your tax invoices. You pick the purpose (Material sent to work site, Supply of goods (invoice to follow), Job work, Supply on approval, Sent for repair or testing, or Other), add the items and save a PDF. When goods sent on a challan become a sale, you turn the challan into a tax invoice in one step, without typing the items again.
Challans are not counted in the free plan's 10 tax invoices a month. The tool does not make e-way bills: generate those on the e-way bill portal and note the number on the challan. See what the tools do, create a free account or compare plans. Our guides to the quotation format and credit notes and debit notes cover the other billing papers, and the work order format guide covers the letters that start a contract.
Common questions
What is a delivery challan in GST?
It is the document that covers goods moving without a tax invoice, in the cases allowed by Rule 55 of the CGST Rules: job work, movement for reasons other than a supply, liquid gas of unknown quantity, and other supplies the CBIC notifies. It shows the parties, the goods, their HSN code, quantity and value, and a signature.
What is the difference between a delivery challan and a tax invoice?
A tax invoice records a sale and the GST charged on it, and the buyer needs it to claim input tax credit. A delivery challan only covers the movement of goods. If the movement later becomes a sale, a tax invoice must still be issued.
Is a delivery challan required for job work?
Yes. Rule 45 says inputs, semi-finished goods or capital goods go to the job worker under a challan issued by the principal, with the Rule 55 details, and those challans are reported in Form GST ITC-04.
Is an e-way bill required with a delivery challan?
Yes, when the consignment value is more than ₹50,000, even if the goods aren't being sold. For goods sent to a job worker in another state, it is needed whatever the value (Rule 138).
Do I charge GST on a delivery challan?
Not when goods go to your own site, for repair or for job work, since nothing is being sold. Rule 55 asks for the tax rate and amount only where the goods are moving for a supply to the consignee, and the tax is then settled on the tax invoice.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.