Works
NHAI tenders: where they are published, EPC, HAM and BOT, registration and how to bid
NHAI tenders explained: where NHAI publishes, EPC, HAM and BOT, free registration on etenders.gov.in and BIMS, eligibility, bid security and how to bid.
By GovtTenderHub editorial teamUpdated 11 min read
On this page
In short
- NHAI tenders are put up on nhai.gov.in and submitted online on etenders.gov.in. Highway works also need your firm's details on MoRTH's BIMS portal (bims.gov.in). Registration on both is free.
- You need a Class 3 DSC in the name of your authorised signatory, backed by a power of attorney in NHAI's format.
- Most works for contractors are EPC (NHAI pays for the build in stages). Bigger projects use HAM (40% paid during construction, 60% as annuities) or BOT (you earn from tolls).
- In a December 2025 NHAI EPC tender worth ₹37.32 crore, bidders needed: payments from eligible projects more than the estimated cost over five years, two similar works of 25% or one of 35%, net worth of 5%, average turnover of 20%, and bid capacity of A × N × 2.5 − B + C.
- That tender asked for bid security of 1% of the estimate, a ₹10,000 document fee, 120 days of bid validity and, from the winner, a 3% performance security plus more for deep discounts.
NHAI tenders are the biggest source of national highway work in India, from short underpasses and bridges to long four-lane packages. This guide explains where the National Highways Authority of India publishes its tenders, how EPC, HAM and BOT contracts differ, how to register on etenders.gov.in and BIMS, what a typical NHAI tender asks for, and what happens after the bids open. For roads tendered by state PWDs and PMGSY, see our road tenders guide.
Where NHAI publishes its tenders
NHAI's notices point you to three places. The December 2025 RFP for a vehicular underpass on NH-39 in Madhya Pradesh, which we use as the example in this guide, said the full bid document could be viewed and downloaded from:
| Website | What you do there |
|---|---|
| nhai.gov.in | Read the notice and RFP, and any addendum |
| etenders. | Register, download the RFP, and submit the technical and financial bids |
| bims.gov.in | Update your firm's details and apply for the tender |
The RFP said addenda go up on all three. Bids sent any other way, including by fax or email, are rejected.
Each notice names the NHAI office running the tender, such as a regional office, with the officer's name and address for queries and for the physical documents the lowest bidder must hand in.
GovtTenderHub shows NHAI tenders published on CPPP on our NHAI tenders page, next to other road construction tenders from states and PMGSY. Searching and reading them is free.
Types of NHAI tenders: EPC, HAM and BOT
| Type | Who pays to build | How you are paid |
|---|---|---|
| EPC | NHAI | Stage payments as work progresses |
| HAM | NHAI 40%, you 60% | Construction support, then annuities with interest |
| BOT (toll) | You | Tolls over the concession, often 15 to 20 years |
- EPC (engineering, procurement and construction): you design and build for a fixed price and maintain the work through the defect liability period. Most packages within reach of mid-sized contractors are EPC.
- HAM (hybrid annuity model): approved on 27 January 2016. NHAI pays 40% of the project cost during construction and the rest as annuities, generally over 15 years. NHAI collects the tolls, so you carry no traffic risk.
- BOT (build, operate, transfer): you finance the road and recover your money from tolls.
Both HAM and BOT are public private partnerships, so the bars for them are much higher than for EPC works.
NHAI also tenders maintenance contracts, underpasses, bridges and flyovers as separate EPC works, and consultancy such as supervision, independent engineers and detailed project reports. Consultants for MoRTH work register on MoRTH's INFRACON portal.
NHAI registration: etenders.gov.in and BIMS
NHAI's RFP doesn't ask for enlistment in a contractor class, as a CPWD or state PWD tender might. Instead, you register your firm on two portals. The RFP says it is "mandatory" to register on etenders.gov.in and BIMS, and the user ID and password are "obtained free of cost".
What you need
- A Class 3 DSC from a licensed certifying authority. The RFP wants it in the name of the authorised signatory, in the bidder's corporate capacity (for a JV, the lead member's), with proof uploaded. Otherwise the bid is treated as non-responsive. See DSC for e-tender.
- A power of attorney for the signatory in the RFP's format. The lowest bidder hands in the original before the award.
- PAN, GSTIN and CIN (for companies) for BIMS.
- Five years of audited accounts, your completed and ongoing projects, and experience certificates.
etenders.gov.in
etenders.gov.in is an NIC GePNIC portal. Enrol with Online Bidder Enrollment, log in and map your DSC, as in our NIC bidder registration guide. The RFP says registration must be valid at least up to the bid due date, and a firm already registered doesn't need to register again.
BIMS (Bidder Information Management System)
BIMS is MoRTH's portal, which its home page says is used by MoRTH, NHAI and NHIDCL to onboard contractors. You submit your PAN, GSTIN and CIN once, and they are checked against national registries before your account is activated.
The NHAI RFP asks you to upload your project details, net worth, turnover, bridge and tunnel details on BIMS, and to generate a certificate with your unique Firm ID before submitting the bid. Technical details are picked up from BIMS once you apply. Keep these up to date: the RFP says they must be current on the bid due date.
BIMS lists its helpdesk as 011-23741866 and portalsupport.rth@gov.in, Monday to Friday, 9:30 am to 6 pm.
NHAI tender eligibility: a real example
Every RFP sets its own figures, usually as a share of the estimated project cost. Here is how the December 2025 NH-39 underpass RFP worked, for an estimated cost of ₹37.32 crore:
| Test | Rule in the RFP | Amount |
|---|---|---|
| Technical capacity | Payments for eligible projects in the last 5 years, more than the estimated cost | Over ₹37.32 crore |
| Similar works | 2 works of 25% each, or 1 of 35% | ₹9.33 crore or ₹13.06 crore |
| Net worth | At the close of the last year | ₹1.87 crore (5%) |
| Average turnover | Last 5 years | ₹7.46 crore (20%) |
| Bid capacity | A × N × 2.5 − B + C | More than the bid value |
Points that trip people up:
- What counts as "similar". A similar completed work must include all the major components of the work being tendered. A work counts as completed once more than 90% of its value is done.
- Highway and core sector experience. Highway-sector work counts fully toward technical capacity. Core sector work, such as PMGSY roads, water supply, irrigation, sewerage, hospitals and industrial parks, counts at 0.75. The similar works themselves must come from the highway sector.
- Old figures are updated. Turnover, projects and bid capacity use factors from 1.00 for the latest year to 1.20 for the fifth year back.
- Bid capacity. A is your best year of civil engineering work in the last five years, N the years allowed for this work, B your existing commitments (including works you've won but not yet been awarded), and C any bonus earned on EPC projects. Your statement must be countersigned by each client's engineer, not below Executive Engineer, and verified by your statutory auditor. Our bid capacity guide has a worked example.
- Experience certificates for NHAI work are issued by the General Manager (Technical) at NHAI headquarters, on the Project Director's recommendation.
- Joint ventures. This RFP allowed no JV, because the estimated cost was below ₹100 crore. Larger RFPs allow them; MoRTH's EPC RFP limits a JV to 2 members, each holding at least 26%. See JV and consortium in tenders.
Non-performers can't bid
The RFP excludes a bidder that is debarred or declared a non-performer by MoRTH or its agencies. The list of non-performing conduct includes failing to mobilise key equipment within 4 months of the appointed date, missing milestones, not fixing defects in time, and failing to give a performance security on time in more than one project. You must list your MoRTH, NHAI, NHIDCL and state PWD highway projects and confirm none of these applies.
Bid security, fees and validity
From the same RFP:
- Bid security: ₹37.32 lakh, which is 1% of the estimated cost. You can give an insurance surety bond, account payee demand draft, fixed deposit receipt, banker's cheque or bank guarantee (including an e-bank guarantee sent through SFMS). A bid without it is rejected, and so is one backed by a third party's security.
- Bank guarantee validity: at least 180 days from the bid due date, including a 60-day claim period.
- Demand drafts, FDRs and banker's cheques must reach the NHAI office within 5 working days of the bid due date.
- Cost of the bid document: ₹10,000, paid online to NHAI's account, with the receipt uploaded.
- Bid validity: at least 120 days from the bid due date.
- Refund: bid security is returned within 150 days of the bid due date, except the winner's, which is held until the performance security comes in.
How to bid for an NHAI tender
- Register on etenders.gov.in and BIMS, and map your Class 3 DSC.
- Update BIMS with your projects, net worth and turnover, and generate the Firm ID certificate.
- Download the RFP, the draft agreement and the feasibility or project report. NHAI says the report is only a reference; you are expected to do your own surveys.
- Send queries by email to the officer named in the RFP, by the date in its schedule. NHAI aims to reply no later than 15 days before the bid due date, and sends replies to all bidders without naming who asked.
- Prepare the technical bid: the letter in Appendix IA with its annexures, power of attorney, bid security scan, document fee receipt, integrity pact, ongoing works list and audited accounts. Files go up as PDF or RAR, each no larger than 30 MB.
- Prepare the financial bid in Appendix IB. The price is quoted without GST, and the lowest bidder is generally selected.
- Submit on etenders.gov.in and apply on BIMS before the due time. You can modify or withdraw before the deadline, but once you withdraw, you can't bid again in that tender.
After the bids open
- Technical bids are opened online on the date in the RFP.
- NHAI shows the technical result on the portal for 7 days, with reasons for any rejection, before opening the financial bids.
- The lowest bidder is generally selected, sends in its originals, and receives the letter of acceptance (LOA). It must return a signed copy the next day.
- Performance security of 3% of the bid price is due within 30 days of the LOA. You may give half within 30 days and the rest within 30 days of signing the agreement. The agreement is signed within 10 days of the first half.
- Additional performance security applies to low bids. It starts at 0.1% of the bid price for a bid 11% below the estimate, rising by 0.1% for each further percentage point. At 20% below it is 1%, and beyond that it rises by 0.2% per point.
| Your bid below the estimate | Extra security | Total, as % of bid price |
|---|---|---|
| Up to 10% | None | 3% |
| 15% | 0.5% | 3.5% |
| 20% | 1% | 4% |
| 30% | 3% | 6% |
The performance security stays in place until 60 days after the defect liability period, which was 5 years in this RFP. Highway EPC contracts generally carry a 5-year defect period for bituminous roads and 10 years for concrete roads; our defect liability guide explains it.
For who won and at what price, look up the tender ID in the results section of etenders.gov.in.
Common questions
How do I apply for NHAI tenders?
Register free on etenders.gov.in and on MoRTH's BIMS portal, get a Class 3 DSC for your authorised signatory, and update your project and financial details on BIMS. Then download the RFP, submit your technical and financial bids on etenders.gov.in, and apply on BIMS before the due date.
Is there an NHAI contractor registration fee?
Registration on etenders.gov.in and BIMS is free, the NHAI RFP says. Each tender may charge a cost for the bid document, ₹10,000 in the RFP used in this guide, plus the bid security.
What is BIMS in NHAI tenders?
The Bidder Information Management System, MoRTH's portal used by MoRTH, NHAI and NHIDCL to onboard contractors. NHAI's RFPs ask you to keep your projects, net worth and turnover updated there and to apply for the tender on it too.
What is the bid security for NHAI tenders?
It is set in each RFP. In the December 2025 NH-39 RFP it was ₹37.32 lakh, or 1% of the estimated cost, payable as a bank guarantee, insurance surety bond, demand draft, FDR or banker's cheque.
Can a small contractor get NHAI work?
Yes. NHAI tenders smaller EPC works such as underpasses, bridges and maintenance, where the estimated cost and the bars are lower. Core sector experience, such as PMGSY roads, also counts toward technical capacity, at a lower weight.
Where can I see NHAI tender results?
On etenders.gov.in, using the tender ID in the results section. NHAI also shows the technical evaluation result on the portal for 7 days before opening the financial bids.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.