Final Taper Ogee Die Carbide for Case 30 MM Steel BMP-2 in MCC Section DRG. No. SCC30/T/0268/C

by Department of Defence Production

Published
Thu, 29 Oct
9:55 am
Bid submission closes
Thu, 19 Nov
10:00 am· 18 days left

Tender details

Organisation: Ministry of Defence › Department of Defence Production › Yantra India Limited
Location: Central Government
Tender ID: GEM/2026/B/8213530
Category: Steel, Hardware & Tools
Quantity: 3
Source portal: GeM — Government e-Marketplace

Key terms of this bid

Read from the GeM bid document on 30 Oct 2026, 2:29 am IST. The document below is the final word.

EMD: Not required
Performance security: Not required
Minimum turnover: Asked; Amount in the buyer's terms
Experience: 3 years; Of similar supply or service
Buyer's added terms: Ask for turnover; Read them in the bid document
Bid type: Two Packet; Total value wise evaluation
Reverse auction: Yes; After technical evaluation
Offer validity: 180 days; From the bid end date
Experience & turnover relaxation: Yes, for MSEs and startups; With supporting documents
Purchase preference: MSE

Documents sellers must upload

Experience Criteria
Bidder Turnover
Certificate (Requested in ATC)

What to upload, checked against your documents

5 items from this bid document, in plain words, with what's ready and what's missing. For GeM bids; your first checklist is free.

Check your documents

Delivery location

THANE RURAL
Quantity 3 · Deliver within 90 days

Bid document

GeM bid document · GEM/2026/B/8213530

Official PDF: terms, eligibility, EMD, specifications and ATC

See the full details with a free account

Eligibility: turnover, experience, MSE and startup relaxations
The documents sellers must upload
The GeM bid document, to read and download
Delivery locations and quantities

Takes a minute. The tender ID stays free for everyone.

How to bid

1Read the bid document on this page: the terms, eligibility, EMD, specifications and ATC (additional terms and conditions).
2Log in to your GeM seller account (register at gem.gov.in if you don't have one; it's free).
3Search BidPlus for bid number GEM/2026/B/8213530 and submit your offer before the closing time.

New to bidding? Read How to participate in a GeM bid, step by step: from finding the bid to getting paid, How to read a GeM bid document, section by section and GeM seller registration: documents, charges and steps.

Before you bid

Does this tender fit your business?

Tell us what you do and your past works: we check its EMD, turnover, experience and similar-work rule against them, and find more that fit.

Check with Tender Match

Who bid and who won similar tendersBusiness plan

Every bidder's price and the winner in tenders like this one, and how far below the estimate they were won, before you price yours.

Unlock with Business

Ask AI about this tender3 questions free

In English, Hindi or your language: what it needs, whether to bid, and at what price.

Get tenders like this every morning

New steel, hardware & tools tenders, by email each morning and in your account. One district is free; all of India from ₹299 a month.

Create free alert See plans

Won a tender? Make GST bills and running bills, write letters on your letterhead and pay your workers, all in your account. See what's included

More from Department of Defence Production

All their tenders

Ready Mixed Paint, Air Drying, Red oxide– Zinc Phosphate, Priming. As per IS. 12744.
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 9:00 am
Cabin Arrangement: Providing Cabin arrangement-L shape with Glass of 9 mm thickness including door a, Pantry Room Partition: Partition for Pantry Room 4.5 ft width and 6 ft height Thickness of the Glass, Pantry Arrangement: Pantry Arrangement including SS Sink and SS Water Tap PVC Pipe Lines and Gra, Conference Hall at Second Floor: Establishing Conference Hall at 2nd floor: Fixing of existing glas
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 9:00 am
Insourcing of 115806 Man Hours for Painting activity of aircraft assemblies and sub-assemblies FSP24
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 9:00 am
Airlube Ut Synthetic Oil" Elgi Airlube Ut Syn" of Make: Elgi /Servo Synco E68 (VG68) of Make: IOCL
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 9:00 am
ATE for SLD Card fine tuning, ATE for SLD Card OTR Testing, ATE for PINFET Card, ATE for Temperature Test (Low, High), Thermal Cycling and Damp Heat, ATE for Interface card functional testing, ATE for Isolation & Resistance Test, ATE for Power Supply Card (DC-DC), ATE for Accelerometer OTR Testing with single axis RT (Vertical) with chamber, ATE for PHE card OTR Setup with single axis RT with chamber, ATE for Phase Modulator, ATE's for FSPU Functional Testing with single axis RT, ATEs for FSPU OTR Testing with Two axis RT with chamber, Portable ATEs for ESS Testing (Vibration, Shock test, Bump Test)
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 9:00 am

Similar live tenders

Steel, Hardware & Tools in Central Govt

Carbide Inserted Die for 3RD Draw of 30MM Cartg. Case, OD160XID41XHT50, GT 30, Kennametal Part NO-636
Department of Defence Production · Central Govt
4 days left
Thu, 5 Nov, 1:00 pm
Carbide Die for II-ND Draw Operation of 30MM Sarath Steel CC as per DRG No SSC30/T/0232 Dt 10.10. 201
Department of Defence Production · Central Govt
17 days left
Wed, 18 Nov, 5:00 pm
Carbide Die for IV TH Draw Operation of 30MM Sarath Steel CC as per DRG No SSC30/T/0246 Dt 27.01. 200
Department of Defence Production · Central Govt
17 days left
Wed, 18 Nov, 5:00 pm
Carbide Inserted B/C Die, B & C Die (Carbide Inserted) SK407, B&C Carbide Die for GM Cup 7.62, Blankin
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 2:00 pm
Bench Vice Best Quality 6 size Tough, Surface Plate, Fixed Hand Hacksaw Frame 12, Adjustable Hand Hacksaw Frame 12, Hand Hacksaw Blade 12, Hand Hacksaw Blade 1x12, Straight Shank Twist drill bit Sizes, Taper Shank twist drill bit. Sizes, Steel Rule-30cm., VernierCalliper, 0 150mm, Micrometer, 0-25mm and 0-50mm, Vernier height guage 12 4, Tap wrench 25mm with handle Scibber, Die Wrench 50mm. With handle Dot punch 6, Hand Drilling Machine with Try square 12, Single cut flat file 12, doubble cut flat file 12, round file 12, half round file 12, Flat chisel, cross cut chisel, ball peen hammer 200 gm, cross pin hammer 200gm, ball peen hammer 500 gm, cross pin hammer 500gm, Center Punch High carbon steel, Dot Punch High carbon steel, Divider leg length 150 mm, forged carbon steel, outside calliper leg length 150 mm forged carbon steel, Hand held welding shields, Welding electrode E7018 E7015, Steel Measuring Tape 5 m, 25 mm wide, metric graduation, lock mechanism, Steel Rule 300 mm, stainless steel, etched graduations, 0.5 1 mm divisions, Try
Science & Technology Department Bihar · Bihar
6 days left
Sat, 7 Nov, 5:00 pm
Upper Carbide Die to DRG. No. CCT/004/126A.
Department of Defence Production · Central Govt
Tomorrow
Mon, 2 Nov, 9:00 pm

18 days left

Thu, 19 Nov, 10:00 am

Bid document