Sectors
Manpower Supply Tenders: How to Bid, GeM Outsourcing and Labour Law
How manpower supply tenders work: where to find them, GeM outsourcing and the 3.85% service charge, contract labour licence, minimum wages, EPF and ESIC.
By GovtTenderHub editorial teamUpdated 12 min read
On this page
In short
- A manpower supply tender hires an agency to place workers in a government office: data entry operators, office assistants, drivers, cleaners, technicians and more. The agency is their employer and pays their wages and contributions.
- Central buyers mostly use GeM, under Manpower Outsourcing Services – Minimum wage or – Fixed Remuneration. You compete mainly on your service charge, and GeM does not allow less than 3.85%.
- The four Labour Codes have been in force since 21 November 2025. Under the OSH Code a contractor needs a contract labour licence only with 50 or more contract workers (it was 20), and the licence is valid for 5 years.
- Monthly wages must be paid before the 7th of the next month. GeM's manpower SLA asks for wages by bank transfer only and EPF and ESI deposits by the 15th.
- Missed wages cost money and can cost you future work: GeM's SLA deducts ₹100 per worker per day for late wages or deposits, and since 8 May 2026 repeated wage defaults on government contracts are a ground for debarment.
Manpower supply tenders are among the most common service tenders in India. Ministries, hospitals, universities, PSUs and municipal bodies all outsource staff, and they keep doing it year after year. This guide explains how a manpower supply tender works, where to find one, how manpower outsourcing on GeM is priced, and what the labour law asks of you on minimum wages, EPF, ESIC and the contract labour licence.
What is a manpower supply tender?
In a manpower supply tender, a government buyer asks agencies to supply a set number of workers for a set period, usually one or two years. The buyer says which posts it needs, how many people, the working hours and the pay rules. The winning agency recruits the workers, puts them on its own rolls, pays them every month and bills the buyer.
The posts cover almost any job that isn't a permanent government post:
- Office staff: data entry operators, office assistants, receptionists, peons (multi-tasking staff).
- Technical staff: electricians, plumbers, lab assistants, IT support, lift operators.
- Drivers and helpers.
- Cleaning and housekeeping staff (often a separate housekeeping tender).
- Security guards, which need a separate licence under the Private Security Agencies (Regulation) Act 2005 (security service tenders are listed separately).
Under the General Financial Rules (GFR), these are non-consultancy services: services with measurable outputs, bought under Rules 197 to 206. Our GFR 2017 guide explains those rules.
Where to find manpower supply tenders
| Buyer | Where they publish |
|---|---|
| Central ministries, offices, CPSUs | GeM, and CPPP for anything not bought on GeM |
| State departments and boards | The state's e-procurement portal, and GeM in many states |
| Municipal bodies, hospitals, universities | State portal, GeM, or their own website |
| Defence units | GeM and the Defence eProcurement portal |
GovtTenderHub collects these in one place. The manpower tenders page lists outsourcing contracts from every portal we cover, and manpower and services tenders shows the wider category. Each state also has its own page, such as manpower tenders in Delhi.
Manpower outsourcing on GeM
GeM lists two main categories for outsourced staff:
| Category | When buyers use it |
|---|---|
| Manpower Outsourcing Services – Minimum wage | Pay is linked to the notified minimum wage for each skill level |
| Manpower Outsourcing Services – Fixed Remuneration | The buyer sets a fixed monthly pay for each post |
Security guards have their own GeM categories, and so do sanitation and cleaning services.
How the price is worked out
The buyer fills in the cost of each worker: the minimum wage or fixed pay, and the statutory items such as EPF, EDLI, ESI and bonus, plus any allowances and overtime. GeM's FAQ says the minimum wage the buyer enters is exclusive of GST. You then quote a service charge as a percentage, and GeM adds it and GST to reach your total.
Because the wage and statutory costs are the same for everyone, the contest is mostly about the service charge. There is a floor: under the Department of Expenditure's OM No. F.6/1/2023-PPD of 6 January 2023, the minimum service charge for commission-based services such as manpower outsourcing, security manpower and sanitation is 3.85%. GeM's FAQ says no bidder may quote less.
Eligibility a GeM buyer can set
From GeM's services FAQ:
- Past experience: similar services completed in the last three years, as three works of at least 40%, two of at least 50% or one of at least 80% of the estimated cost.
- Turnover: the buyer may set a minimum annual turnover and checks it at technical evaluation.
- MSE and startup relaxation: GeM does not make it compulsory, so some manpower bids relax experience and turnover and others don't. Read the bid document.
- Performance security: the buyer can ask for an ePBG when the estimated bid value is above ₹5 lakh.
Our guide on how to bid on GeM walks through participation, evaluation and payment, and GeM registration covers getting your service listed first.
Labour law for manpower agencies: the four Labour Codes
The Labour Ministry made the four Labour Codes effective from 21 November 2025. They replace 29 older central labour laws. For a manpower agency, three of them matter most:
| Code | What it covers for you |
|---|---|
| Code on Wages, 2019 | Minimum wages, time of payment, bonus |
| Code on Social Security, 2020 | EPF, ESIC, gratuity |
| Occupational Safety, Health and Working Conditions (OSH) Code, 2020 | Contract labour licence, hours, leave, welfare |
Labour is a subject both the centre and the states make laws on, so each state frames its own rules under the codes and fixes its own minimum wages. Many tender documents, including GeM's standard manpower SLA, still name the old Acts such as the Contract Labour (Regulation and Abolition) Act 1970. Follow the buyer's clause, and ask at the pre-bid stage if something looks out of date.
Contract labour licence
The OSH Code raised the threshold for the contract labour rules from 20 to 50 workers. A contractor employing fewer than 50 contract workers does not need a licence. At 50 or more you need one, and it is valid for 5 years. A contractor working in more than one state can take a single all-India licence from the authority the central government notifies, instead of a licence in every state.
Two more points from the OSH Code affect your contracts:
- The principal employer is liable for unpaid wages. If the contractor fails to pay, the principal employer (the government office) must pay the contract workers. GeM's SLA lets the buyer pay workers directly and recover the money from you.
- Contract labour in core work. The code defines core and non-core activities. Contract labour can be used in core work only where that work is ordinarily done through contractors, doesn't need full-time workers for most of the day, or is a sudden rise in work to be finished in a set time.
Minimum wages
Under the Code on Wages, minimum wages now cover all employees, not only listed jobs. The government whose area the work is in (the "appropriate government") fixes the rates, and they can't be lower than the floor wage the central government sets. Rates must be reviewed at least every five years, and they can change in the middle of your contract.
Before you bid, check how the tender handles a minimum wage revision: whether the buyer pays the higher wage, or whether your quoted price is fixed.
When wages must be paid
For monthly-paid workers, the Code on Wages says wages are due before the end of the 7th day of the next month. Workers who leave or are removed must be paid within 2 working days. GeM's SLA adds its own rules: wages only into the workers' bank accounts, and proof of payment before your next bill is cleared.
EPF and ESIC
Under the Code on Social Security:
- EPF applies to establishments with 20 or more employees. Smaller ones can choose to join.
- ESIC now applies across India; the old limit to "notified areas" is gone. Establishments with fewer than 10 employees can join voluntarily if the employer and employees agree.
In practice almost every manpower tender asks for your EPF and ESIC codes, and GeM's SLA makes you deposit both the employer's and the employee's share by the 15th of each month.
Hours, leave and appointment letters
The OSH Code gives every employee an appointment letter in the prescribed format, with designation, wages and social security details. Normal work is capped at 8 hours a day and 48 hours a week; overtime needs the worker's consent and is paid at double the normal rate. Paid annual leave now starts after 180 days of work in a calendar year, down from 240. Women can work before 6 a.m. and after 7 p.m. with their consent, if the employer arranges their safety and transport.
Documents for a manpower supply tender
| Document | Why it's asked |
|---|---|
| PAN, GST and the firm's registration | Basic identity and tax status |
| EPF and ESIC registration codes | Proof you can cover workers |
| Contract labour licence | Needed once you employ 50 or more contract workers |
| Work orders and completion certificates | Proof of similar services |
| CA turnover certificate, ITRs | Financial strength |
| Udyam certificate | MSE benefits such as EMD exemption |
Some buyers also ask for a list of current deployments, ISO certificates or a local office in the district. See documents required for government tenders for the general set.
Manpower supply is a service, so an MSE that provides it can claim the central MSE benefits, including EMD exemption and purchase preference. MSME benefits in government tenders explains the conditions.
How to bid for a manpower supply tender
- Read the scope. Note the posts, numbers, skill levels, shifts, location and contract period.
- Check eligibility. Compare the experience, turnover and registrations asked for with your papers.
- Build a cost sheet. For each post: wage, EPF, EDLI, ESI, bonus, leave and relievers, uniform, ID card, overtime if any. Then add your overheads and the cost of funding one or two months of wages.
- Set your service charge. Not below 3.85% on GeM. Check that it covers the costs above with something left over.
- Raise queries early. Ask about wage revision, payment days and penalties in the pre-bid meeting or GeM's representation window.
- Upload and submit. Upload every document asked for, claim EMD exemption if eligible, and sign with OTP, e-sign or DSC.
- Be ready to deploy. Most buyers want staff in place soon after the order, with police verification done.
After you win: running the contract
GeM's standard SLA for manpower outsourcing (as attached to live GeM bids in October 2026) sets out what the buyer will check every month:
- Police verification and character checks of every worker, at your cost.
- Photo ID cards issued within 8 days of a worker joining.
- A substitute within 2 days when a worker is absent and the buyer asks for one.
- Wage proof with each bill: proof of salary paid, a bank statement and EPF and ESI payment proof. The next month's bill is paid only after the certificate of disbursement.
The deductions are real. For each worker not deployed, the buyer can deduct a day's wages per day, up to 15 days, after which it can cancel the contract and charge 10% of the order value. Late wages or late EPF and ESI deposits cost ₹100 per worker per day, and ₹200 for a repeat. GeM's FAQ caps other SLA deductions at 10% after the non-delivery deductions, and buyers can add bid-specific SLAs on top.
Payment is monthly. On GeM, service bills are paid within 10 days of the buyer's acceptance certificate (SDAC) unless the bid sets other terms, and the performance security comes back after the contract ends.
Common questions
What is a manpower supply tender?
It is a tender in which a government office hires an agency to supply workers for a fixed period, such as data entry operators, office assistants, drivers or cleaners. The agency employs the workers, pays their wages and contributions, and bills the office each month.
Is a labour licence required for manpower supply?
Under the OSH Code, in force since 21 November 2025, a contractor needs a contract labour licence only when it employs 50 or more contract workers. The licence is valid for 5 years, and a single all-India licence is available for contractors working in several states. Some tenders still ask for a licence, so check the eligibility clause.
What is the minimum service charge in GeM manpower tenders?
3.85%, under the Department of Expenditure OM of 6 January 2023. It applies to commission-based services such as manpower outsourcing, security manpower and sanitation, and GeM does not accept a lower quote.
Who pays EPF and ESIC for outsourced staff?
The manpower agency, as the employer, deposits both its share and the worker's share. GeM's SLA asks for this by the 15th of each month and for proof with your bills. If the agency defaults, the government office can pay the workers and recover it from the agency's bills.
Can a new agency get manpower tenders?
Yes, though many bids ask for three years of similar services and a minimum turnover. Look for bids that relax experience and turnover for MSEs and startups, start with smaller contracts, and keep a completion certificate from every contract you finish.
How do I find manpower tenders near me?
Search the manpower tenders page on GovtTenderHub and filter by state or district, or set a daily tender alert for "manpower" in your area. Reading tenders is free; alerts are on our plans page.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.