Works
Irrigation Tenders: Who Issues Them, Canal and Lift Irrigation Works, and PMKSY Funding
Where irrigation tenders come from: water resources departments, canal and lift irrigation works, PMKSY-AIBP and M-CADWM funding, eligibility and checks.
By GovtTenderHub editorial teamUpdated 9 min read
On this page
In short
- Irrigation tenders come mainly from each state's Water Resources or Irrigation Department, minor irrigation departments, lift irrigation corporations and irrigation development corporations. Almost all are published on state e-procurement portals.
- Typical works: canals and canal lining, distributaries and minors, lift irrigation schemes, barrages, weirs and check dams, restoring tanks and ponds, desilting, flood embankments and underground piped irrigation.
- Much of the money comes through the Pradhan Mantri Krishi Sinchayee Yojana (PMKSY), approved for 2021-26 with an outlay of ₹93,068 crore. Its AIBP part targeted 13.88 lakh hectares of new irrigation potential.
- In April 2025 the Cabinet approved M-CADWM, a pilot sub-scheme (initial outlay ₹1,600 crore) for underground pressurised pipes from the canal to farms of up to 1 hectare.
- Irrigation work is a works contract: you usually need registration in the department's contractor class, and central MSE benefits such as EMD exemption don't apply to works.
Irrigation tenders are one of the steadiest sources of civil work in rural India. Every state has a large irrigation or water resources department with canals to build, line, repair and desilt every year, and newer schemes are adding pipes and pumps to old canal networks. This guide explains who issues irrigation tenders, the kinds of work, how central schemes fund them, the eligibility you'll need and where to find them.
Who issues irrigation tenders?
Irrigation is mainly a state subject, so most irrigation tenders come from state bodies. The names differ, but the structure is similar everywhere:
| Buyer | What they tender |
|---|---|
| Water Resources or Irrigation Department | Major and medium projects: dams, barrages, main canals, lining, flood works |
| Minor Irrigation Department | Small tanks, check dams, tube wells, small lift schemes |
| Lift irrigation corporation | Pump houses, rising mains, delivery chambers, O&M |
| Irrigation development corporation or nigam | Large state projects, often in packages |
Some examples from the portals GovtTenderHub covers:
- Uttar Pradesh: the UP Irrigation Department (Civil) and the Minor Irrigation Department, among the busiest buyers on UP's portal.
- West Bengal: the Irrigation and Waterways Department, on the state's e-tender portal.
- Gujarat: the Narmada, Water Resources, Water Supply and Kalpsar Department, on nProcure.
- Odisha: the Odisha Lift Irrigation Corporation, on the Odisha portal.
- Karnataka: Krishna Bhagya Jala Nigam, on KPPP.
- Bihar: the Water Resources and Minor Water Resources Departments, on Bihar's portal.
Central bodies under the Ministry of Jal Shakti also tender studies, surveys and some works, mostly through CPPP and the central eProcurement portal.
Types of irrigation works
| Work | What it involves |
|---|---|
| Canal construction and lining | Earthwork, concrete or other lining of main canals, branches, distributaries and minors |
| Canal structures | Head regulators, cross regulators, falls, aqueducts, culverts and bridges |
| Lift irrigation | Intake, pump house, pumps and motors, rising main, delivery chamber, power line |
| Minor irrigation | Check dams, weirs, small tanks, tube wells |
| Repair and restoration | Restoring tanks and ponds, desilting, strengthening bunds |
| Flood works | Embankments, spurs and bank protection |
| Piped irrigation | Underground pipes from the canal to the farms, with outlets and controls |
| O&M | Running pump houses and gates, clearing weeds and silt |
Most works are priced through a BOQ (bill of quantities) built on the department's schedule of rates (SOR). Lift irrigation and piped schemes often come as larger EPC or turnkey packages that include design, supply and O&M. Our schedule of rates guide and BOQ guide explain how the pricing works.
How irrigation projects are funded
PMKSY and AIBP
The Pradhan Mantri Krishi Sinchayee Yojana (PMKSY) is the main central scheme behind state irrigation projects. In December 2021 the Cabinet Committee on Economic Affairs approved it for 2021-26 with an outlay of ₹93,068 crore:
| Part | Amount |
|---|---|
| Central assistance to states | ₹37,454 crore |
| Debt servicing for loans taken for irrigation in 2016-21 | ₹20,434.56 crore |
| State share | ₹35,180 crore |
Its parts that matter to contractors:
- AIBP (Accelerated Irrigation Benefits Programme): central help to finish major and medium irrigation projects. For 2021-26 it targeted 13.88 lakh hectares of additional irrigation potential and the completion of 60 ongoing projects, with their command area development. New projects have been added since, such as Bihar's Kosi–Mechi intra-state link project in 2025.
- CAD&WM (Command Area Development and Water Management): the field channels and works that carry canal water to farms, with 85 ongoing major and medium projects to complete.
- Har Khet Ko Pani: surface minor irrigation and the repair, renovation and restoration of water bodies, targeting 4.5 lakh hectares of extra irrigation.
The 2021-26 period ended in March 2026. Check the Department of Water Resources (jalshakti-dowr.gov.in) for the scheme's terms from 2026-27 before you plan around new AIBP work.
M-CADWM: piped irrigation from canals
On 9 April 2025, the Cabinet approved Modernization of Command Area Development and Water Management (M-CADWM) as a sub-scheme of PMKSY for 2025-26, with an initial outlay of ₹1,600 crore. It builds the backbone for micro-irrigation: underground pressurised piped irrigation from an existing canal or source up to the farm gate, for farms of up to 1 hectare.
The first phase is a set of pilot projects, funded through a challenge to states. PIB later reported 32 clusters in 23 states and UTs sanctioned, covering about 75,000 hectares. Once built, the assets pass to Water User Societies to run. The government said a national plan for command area development would follow from April 2026, for the 16th Finance Commission period.
For contractors, this means a new kind of irrigation tender: pipe networks, pumping, outlets and automation, rather than earthwork alone. If you do pipeline work for water supply tenders, these packages are worth watching.
Eligibility for irrigation tenders
Each tender sets its own figures, but the tests are familiar from other works:
- Contractor registration. Most state irrigation and water resources departments register contractors in classes, and each class can bid up to a set value of work. Some states use one registration across their works departments. Get registered in the right class before you bid.
- Similar works. Central works often follow the DoE works manual's rule of three works of 40%, two of 50% or one of 80% of the estimated cost, completed in the last seven years. "Similar" may mean canal lining, lift irrigation or pipe networks specifically, so read the definition. Our eligibility criteria guide explains the tests.
- Turnover and bid capacity. Larger works ask for an average turnover and check your bid capacity (A × M × N − B); see the bid capacity guide.
- Machinery and staff. Excavators, concrete paving or lining equipment, dewatering pumps, and qualified engineers named in the bid.
- Security. An EMD with the bid and a performance security if you win. Under central rules the performance security for works is 3% to 10% of the contract value.
Big projects such as barrages and long canal packages often allow joint ventures. See JV and consortium in tenders for how that works.
Things to check before you quote
- The working season. Canal work usually has to be done while the canal is closed between irrigation seasons. Check the closure dates and whether the completion time allows for them.
- Water on site. Dewatering for structures and lining can be a large cost. See whether the BOQ pays for it or whether it sits inside the item rates.
- Land and clearances. Pipe routes and new canals need land. Ask whether the department has the land in hand before work starts.
- Rates and escalation. Items come from the department's SOR. On long works, check for a price variation clause; central works over 18 months normally have one.
- Defect liability and O&M. Lift and piped schemes often include years of operation. Price power, operators and repairs, and check the defect liability period.
- Payment flow. Projects funded under central schemes depend on releases to the state. Read the payment terms and any clause on delays.
Where to find irrigation tenders
- State e-procurement portals: nearly all irrigation, water resources and minor irrigation tenders.
- CPPP and the central eProcurement portal: works and consultancy for central bodies under the Ministry of Jal Shakti.
- GeM: pumps, pipes, gates and other supplies, and some services.
GovtTenderHub collects them from every state portal it covers: see irrigation tenders, the wider water and sanitation tenders and all civil works tenders. Small tank and pond restoration jobs also appear under pond tenders. Set a daily tender alert for "irrigation", "canal" or "lift irrigation" in your districts to see new ones each morning.
Common questions
What is an irrigation tender?
It is a works tender from an irrigation or water resources department, or a related corporation, for building, repairing or running irrigation systems: canals, lining, canal structures, lift irrigation schemes, check dams, tanks, flood embankments or piped irrigation networks.
How do I get irrigation department contracts?
Register as a contractor with your state's irrigation or water resources department in the class that matches the work you want, enrol on the state e-procurement portal with a Class 3 DSC, and bid for works that match your experience. Start with minor irrigation and repair works if your record is small.
What is PMKSY-AIBP?
AIBP is the Accelerated Irrigation Benefits Programme, a part of the Pradhan Mantri Krishi Sinchayee Yojana that gives central help to states to finish major and medium irrigation projects. For 2021-26 it aimed to complete 60 ongoing projects and create 13.88 lakh hectares of new irrigation potential.
What is M-CADWM?
Modernization of Command Area Development and Water Management, a PMKSY sub-scheme approved on 9 April 2025 with an initial outlay of ₹1,600 crore. It funds pilot projects that take canal water to farms through underground pressurised pipes, run afterwards by Water User Societies.
Are irrigation works eligible for MSE EMD exemption?
Not under the central MSE policy, which covers goods and services but not works. Some states have their own rules for local or registered contractors, so check the tender's EMD clause.
Where are lift irrigation tenders published?
On the state e-procurement portal of the state's lift irrigation corporation or water resources department, for example the Odisha Lift Irrigation Corporation on Odisha's portal. GovtTenderHub's irrigation tenders page collects them; search "lift irrigation" to narrow the list.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.