Registration
Electrical contractor licence: the CEA rule, state licensing boards, classes and use in tenders
Electrical contractor license explained: CEA Regulation 31, who issues it, Kerala's Grade A, B and C, supervisor and wireman permits and tender checks.
By GovtTenderHub editorial teamUpdated 10 min read
On this page
In short
- An electrical contractor licence is the state government's permission for a person or firm to carry out electrical installation work. Government electrical tenders normally ask for one.
- The national rule is Regulation 31 of the CEA (Measures relating to Safety and Electric Supply) Regulations, 2023, notified on 8 June 2023: installation work must be done by a contractor licensed by the State Government, under a supervisor with a certificate of competency, by workers holding a permit.
- Work done without this can't be energised or connected to the supply.
- States issue the licences, usually through an electrical licensing board under the Electrical Inspectorate, so classes, conditions and fees differ by state.
- For Central Government works, mines, oil-fields and railways, a licence from any one State or Union Territory is enough; you don't need another state's licence.
- Kerala's example: licences in Grade A, B and C. Grade B covers work up to 650 volts, and Grade A needs three years as a Grade B contractor in Kerala and a full-time Grade A supervisor.
An electrical contractor licence is the first thing an electrical works tender checks, and the one document you can't borrow from someone else at the last minute. This guide explains the central safety rule behind it, how states license contractors, supervisors and wiremen, Kerala's rules as a worked example, and how the licence is used in government tenders.
What is an electrical contractor licence?
Electrical work in India is controlled through three separate papers, each held by a different person:
| Paper | Who holds it | What it allows |
|---|---|---|
| Electrical contractor licence | The firm or proprietor | Taking up and executing electrical installation work |
| Certificate of competency (supervisor) | The supervising engineer or technician | Supervising installation work of the scope stated |
| Permit (wireman or worker) | The person doing the work | Carrying out the wiring and installation |
A licensed contractor must employ, or be, a certified supervisor, and its workers must hold permits. That is why a licence application asks as much about your staff as about your firm.
The central rule: CEA Safety Regulations 2023
The Central Electricity Authority (CEA) notified the Central Electricity Authority (Measures relating to Safety and Electric Supply) Regulations, 2023 on 8 June 2023, under the Electricity Act, 2003. They replaced the 2010 regulations of the same name and came into force on publication in the Gazette.
Regulation 31: who may do installation work
Regulation 31(1) says, in short, that no electrical installation work, including additions, alterations, repairs and adjustments to existing installations, may be done on the premises of or for any consumer, supplier, owner or occupier except:
- by an electrical contractor licensed by the State Government,
- under the direct supervision of a person holding a certificate of competency, and
- by a person holding a permit issued or recognised by the State Government.
What doesn't need a licensed contractor: replacing lamps, fans, fuses, switches, domestic appliances of not more than 250 volts, and fittings, as long as the replacement doesn't change the installation's capacity or character.
Two provisos matter to bidders:
- Exemptions. The Central Government (for its own works, mines, oil-fields and railways) and the State Government (in other cases) can exempt classes of work by Gazette notification, on conditions.
- One licence for central works. For works done for the Central Government, and for installations in mines, oil-fields and railways, a contractor licensed by any State Government or Union Territory administration does not need a licence from the state where the work is.
Regulation 31(2) is the enforcement: installation work done in breach of these rules shall not be energised or connected to the supplier's works.
Other regulations that involve the licence
- Testing new connections (Regulation 33). Before giving a new or additional supply, the supplier either tests the installation itself or accepts test results signed by the licensed electrical contractor.
- Designated persons (Regulation 3). Anyone designated to operate or work on electrical lines and apparatus must hold a certificate of competency or electrical work permit issued by the Appropriate Government, and be entered in the owner's register.
Regulations like these get amended. Check the CEA's website, or ask your state's Electrical Inspectorate, for any change since 2023 that affects your work.
Who issues the licence: state licensing boards
The CEA sets the rule; the states run the licensing. Most states do it through the Electrical Inspectorate and an electrical licensing board, which:
- grants and renews contractor licences, usually in two or three classes by voltage or scope;
- examines and certifies supervisors and issues wireman and worker permits;
- inspects contractors' tools, records and staff, and can suspend or cancel licences.
Names and classes vary from state to state; Kerala, for example, uses Grade A, B and C. Fees are notified by each state government, so get the current figure from your state's official board or inspectorate site, not from an agent.
Electrical contractor licence in Kerala: a worked example
The Kerala State Electricity Licensing Board Rules, 2020 (G.O. (P) No. 2/2020/Power, dated 30 January 2020) set up the Kerala State Electricity Licensing Board, which grants contractor licences, certificates of competency and permits.
Classes of licence
| Grade | Work allowed | Main conditions |
|---|---|---|
| A | The categories of installation work stated in the licence, including high and extra high tension where granted | 3 years as a Grade B contractor in Kerala; a full-time Grade A supervisor; wiremen with permits; tools, office, library and workshop; a bank guarantee certificate |
| B | Installation work not exceeding 650 volts, as stated in the licence | An office in Kerala; a supervisor with a Grade A or B permit and permit-holding wiremen; tools and test kits |
| C | Low and medium voltage installation work stated in the licence | A wireman permit with 3 or 5 years' experience after the permit (depending on how it was issued); possible interview; tools |
For Grade A, the bank guarantee certificate is ₹50,000 for extra high tension scope, or ₹25,000 if the licence is limited to high tension installations (Rule 28). The board can relax the three-year Grade B experience for applicants licensed in two other states with a record of major works, and for those with three years of transformer and HT/LT line work for the state electricity board.
Rules that keep a Kerala licence alive
- Your staff are your licence. If the certificate holder on whose strength the licence was granted leaves, the licence is treated as suspended; if you don't employ a replacement within one month, it is treated as cancelled (Rule 29).
- Keep a staff register of supervisors, wiremen and apprentices; anyone not on it isn't counted as your employee. One supervisor can have at most 10 wiremen, or as the board decides.
- Get your instruments tested at the Electrical Inspectorate's laboratory or one the board approves; the results are needed to issue and renew the licence.
- Put every contract in writing, and give written notice to the supplier and the Electrical Inspector before starting installation work, other than simple replacements (Rule 30).
- Permits are renewed every ten years, and supervisor and wireman permit holders must attend training once in five years (Rule 24).
How to get an electrical contractor licence
The steps are similar in most states, though forms and conditions differ.
- Find your state's licensing authority. Look for the Electrical Inspectorate or electrical licensing board on the state government's website.
- Choose the class you need. Match it to the voltage and kind of work you want to bid for. A low-voltage class won't let you bid for a substation job.
- Put the qualified people in place. You need a supervisor with a certificate of competency of the right grade and wiremen with permits, either on your payroll or yourself, if you hold the certificate.
- Set up the office and tools. Boards usually prescribe test instruments, and some also prescribe an office, a technical library and a workshop for the higher grades.
- Apply in the board's form with the documents and fee it asks for. Some boards interview applicants or inspect their tools.
- Keep it valid. Renew on time, keep your staff register current and inform the board of staff changes.
Electrical contractor licence in government tenders
Government electrical works tenders, from wiring and street lighting to substations and solar plants, ask for a valid licence as part of eligibility. Our documents checklist lists it alongside contractor registration for electrical works, and solar tenders ask for it too; see solar tenders in India.
CPWD handles it at enlistment. Under its 2026 enlistment rules, if you don't hold an electrical contractor licence, you undertake to associate an agency that does (Rule 6.5). Our CPWD contractor enlistment guide explains the rest.
Before you bid, check:
- The class covers the work. Compare the voltage and scope in the tender with the scope written on your licence.
- The state is right. For state government and private works, you normally need the licence of the state where the work is. For Central Government works, mines, oil-fields and railways, Regulation 31 accepts a licence from any state or UT.
- The name matches. The licence should be in the bidding firm's name, or the tender should say how it accepts an associate's licence.
- It stays valid. It should be valid on the bid date, and you should renew it on time so it stays valid for as long as you are doing the work.
You can browse live electrical and power tenders on GovtTenderHub, or narrow them to a state such as Kerala or Tamil Nadu, and check each tender's licence condition before you buy the documents.
Common questions
Who issues the electrical contractor licence?
The state government, usually through its electrical licensing board or Electrical Inspectorate. The CEA's 2023 safety regulations require installation work to be done by a contractor "licenced in this behalf by the State Government".
Is an electrical contractor licence required for government tenders?
For electrical installation work, almost always, and the law requires it for the work itself. Tenders ask for a licence of a class that covers the work. CPWD accepts, at enlistment, an undertaking to associate a licensed agency if you don't hold one.
What are A, B and C class electrical contractor licences?
They are licence grades set by each state. In Kerala, Grade B covers work up to 650 volts, Grade C covers low and medium voltage work, and Grade A covers the categories stated in the licence, including high tension where granted. Other states use their own classes.
Can I use my licence in another state?
For Central Government works and for installations in mines, oil-fields and railways, yes: Regulation 31 says a licence from any state or UT is enough. For other work, you normally need the licence of the state where the work is done.
What is a certificate of competency?
It is the qualification certificate issued to an electrical supervisor by the state's licensing board after examination or on qualifications. Regulation 31 requires installation work to be done under the direct supervision of a person holding one.
Do I need a licence to replace a fan or a switch?
No. Regulation 31 excludes replacing lamps, fans, fuses, switches, domestic appliances up to 250 volts and fittings, as long as the replacement doesn't change the installation's capacity or character.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.