PSUs
BEML tenders: where BEML buys, how its vendor registration works, and what its 2026 bids show
BEML tenders run on GeM and its NIC portal. See BEML vendor registration step by step (₹10,000 fee after assessment) and our 2026 figures on bids and wins.
By GovtTenderHub editorial teamUpdated 8 min read
On this page
In short
- BEML tenders run on GeM and on the Defence PSUs eProcurement portal: 220 and 117 of the 337 BEML tenders open on GovtTenderHub on 31 October 2026. BEML's own site links its NIC portal at eprocurebeml.nic.in.
- BEML tenders in high volume: about 1,100 new in the 30 days to 31 October 2026, mostly parts. Of about 1,400 published in 90 days, 435 were machinery and equipment and 186 steel, hardware and tools.
- They are small and quick. The middle tender that stated a value was worth about ₹4.7 lakh, and the middle tender closed 10 days after publishing.
- In 836 BEML GeM results opened in the 120 days to 31 October 2026, the middle bid had just 1 bidder, the winning price was about 99% of the buyer's estimate in the middle case, and MSEs won 75% of results with a winner.
- To supply parts for BEML's equipment, register at onlinevr.bemlindia.in. Makers need ISO 9001 (or AS 9100D or IATF 16949), ISO 14001 and ISO 45001, pass a factory visit, then pay a ₹10,000 non-refundable fee.
BEML tenders come from BEML Limited, which works in three business verticals: Defence and Aerospace, Mining and Construction, and Rail and Metro. It makes mining and construction equipment, metro cars and ground support vehicles for India's missile and radar projects, and it buys the castings, forgings, hardware, assemblies and services that go into them, many by part number. This guide covers where BEML publishes, how its vendor registration works, and what GovtTenderHub's 2026 figures say about BEML's bids and results.
Where BEML publishes tenders
- GeM. 220 of the 337 BEML tenders open on GovtTenderHub on 31 October 2026 were GeM bids.
- NIC e-procurement. BEML's tenders page links "E-PROCUREMENT (NIC)" at eprocurebeml.nic.in and says its tender listings "can be checked in eProcurement System". GovtTenderHub reads BEML's e-tenders from the Defence PSUs eProcurement system at eprocuremdl.nic.in/nicgep/app, which several defence PSUs share; 117 open BEML tenders came from there.
- bemlindia.in/tenders. BEML's site lists "Active Tenders (Open / EoI)" and "Archived Tenders" from its departments, divisions and facilities.
BEML's Suppliers menu also links its 2026 Purchase Manual, its Integrity Pact, an Approved Active Vendor List, an MSME/Start-up Connect note and Know Your Bill Status, where vendors can follow payments.
Typical open BEML tenders on 31 October 2026 named the part and quantity, such as 500 clip assemblies and 200 cover assemblies to BEML part numbers, or 12 hydraulic control lever assemblies to a stated part number.
GovtTenderHub lists them all on its BEML tenders page, next to other defence PSUs on the Department of Defence Production page.
BEML vendor registration, step by step
BEML's Vendor Registration Procedure (2026) covers three kinds of supplier:
- Manufacturers established in India supplying project items, meaning parts and materials needed to make BEML equipment.
- Firms doing off-loading work: further operations, such as machining, heat treatment or plating, on material BEML supplies.
- Traders who are sole or authorised representatives of reputed OEMs for project items.
Certificates. Except for traders, you need a quality management certificate (ISO 9001, AS 9100D, IATF 16949 or an equivalent), plus ISO 14001 and ISO 45001.
The steps:
- Send a request on onlinevr.bemlindia.in with your organisation details, company profile, product brochure, certificates, a company or product video, and the items you offer BEML.
- Wait for the link. BEML scrutinises the request and, if it needs your items, activates the link to the full application form.
- Fill in the form, then download it, sign it and upload the signed copy on the portal.
- Answer queries. BEML reviews the form and asks for anything missing through the portal.
- Host the assessment. A BEML team visits to assess your manufacturing capability and quality systems.
- Pay the fee once qualified: a crossed demand draft of ₹10,000, non-refundable, in favour of BEML LIMITED, payable at Bangalore, as the assessment and processing fee.
- Get your vendor code. BEML allocates it and tells you.
If BEML has no need in your field, you get an automatic regret mail after 30 days, and your details stay on its database for later needs.
Categories. The procedure groups items as aggregates (assemblies such as pumps, radiators and cylinders), castings, electrical, engine items, fabrication, forgings, hardware, machining, polymer, raw material, services (heat treatment, surface treatment, material testing), springs, and miscellaneous. It lists materials departments to contact about current needs: Corporate Materials, Mining, Construction, Armoured, Hydraulic and Powerline, Equipment Division, Engine, Rail and Metro, Palakkad and Aerospace.
Registration with a buyer like this is a form of vendor empanelment. It is separate from GeM, where a bid is open to sellers with an approved product in its category, subject to the bid's own terms.
BEML tenders in numbers
These are GovtTenderHub's counts of BEML tenders we read on GeM and the Defence PSUs eProcurement portal.
| Measure | On GovtTenderHub |
|---|---|
| Open on 31 October 2026 | 337 |
| New in the 30 days to 31 October 2026 | about 1,100 |
| Published in the 90 days to 31 October 2026 | about 1,400 |
| Of those, machinery and equipment | 435 |
| Middle value (69 tenders that stated one) | about ₹4.7 lakh |
| EMD asked (636 tenders where we could tell) | 5% |
| Days from publishing to closing, middle tender | 10 |
Few BEML tenders state a value, and those that do are small. The middle one was worth about ₹4.7 lakh: half were worth more, half less. Most (the middle half) were between ₹1.1 lakh and ₹20 lakh, and 43 of the 69 were under ₹10 lakh. By type, after machinery and equipment came other items (272), steel, hardware and tools (186), electrical and power (126), food, textiles and supplies (115) and IT and electronics (79).
For a parts supplier, that means:
- Ten days is tight. The middle BEML tender closed 10 days after publishing. You need your registration, GeM catalogue and pricing ready before the tender appears.
- Small orders, often. With about 1,100 new tenders in a month, a parts maker can bid every week rather than wait for one big contract.
- EMD is rare. Only 5% asked for one where we could tell; where an amount was stated, the middle figure was about ₹0.8 lakh.
What BEML's GeM bids ask for, and who wins
Of the 805 BEML GeM bid documents we read:
- 38% sent the bid to a reverse auction.
- 20% asked for past experience (a median of 3 years where a number was given), and 4% for a minimum turnover.
- 16% asked for an ePBG (performance security), at a median of 5%.
- 654 were evaluated total value wise and 150 item wise.
In the 836 BEML GeM results opened in the 120 days to 31 October 2026, the middle bid drew 1 bidder and 1 qualified. The winning (L1) price was, in the middle case, about 99% of the buyer's estimate, and it was below the estimate in 80% of the results that showed both. MSEs won 75% of the results with a winner. Items that came up more than once included flange castings, radiator assemblies, carrier castings, propeller shaft assemblies and camshafts, and DGR-empanelled ex-servicemen (ESM) security services.
This describes past results, not what you should quote. What it does suggest:
- Competition per bid is thin. One bidder in the middle case means a maker that can produce a part to BEML's specification often faces few rivals. A reverse auction in 38% of bids can still bring the price down; see our GeM reverse auction guide.
- Security services go to DGR panels. CPSEs must take security services only from agencies empanelled with the Directorate General Resettlement, which bid through DGR sponsorship on GeM. Our security guard tenders guide explains the category.
- MSEs do well. Three in four results with a winner went to MSEs. Keep your Udyam certificate current and claim MSE status in each bid; our MSME benefits guide has the rules.
Common questions
How do I register as a BEML vendor?
Send a request on onlinevr.bemlindia.in with your company profile, brochure, certificates, a video and the items you offer. If BEML needs your items, it opens the full application form, visits your works for an assessment, and gives you a vendor code once you qualify and pay the fee.
What is the BEML vendor registration fee?
₹10,000, non-refundable, by crossed demand draft in favour of BEML LIMITED, payable at Bangalore. You pay it only after you qualify in BEML's assessment, as its assessment and processing fee.
Can traders register with BEML?
Only traders who are sole or authorised representatives of reputed OEMs for the parts BEML needs. They don't need the ISO 9001, 14001 and 45001 certificates that manufacturers must have.
Where are BEML tenders published?
On GeM and on BEML's NIC e-procurement system, linked from bemlindia.in/tenders. GovtTenderHub lists both on one page; on 31 October 2026, 220 of the 337 open BEML tenders were GeM bids.
Do I need BEML vendor registration to bid on GeM?
Not as a rule. A GeM bid is open to GeM sellers with an approved product or service in its category, but the bid's own terms (ATC) can add conditions, so read them. BEML's vendor registration is for supplying project items and off-loading work. Our GeM bidding guide covers the GeM side.
Find tenders. Win them. Run the work.
- Alerts, ₹299 a month: New tenders for your work by email every morning, anywhere in India, and full details of every tender.
- Business, ₹599 a month: Alerts, plus who bid and who won each tender, GST bills, letters on your letterhead and workers' wages.
Searching tenders is free. Prices include GST; pay yearly and save 10%.