Machinery & Equipment Central GovtGeMNo experience needed

Die Holder

by Department of Defence Production

EMD
₹73,305
Startups, MSEs can claim exemption
Published
Mon, 12 Oct
12:55 pm
Bid submission closes
Mon, 26 Oct
2:00 pm· 7 days left

Tender details

Organisation: Ministry of Defence › Department of Defence Production › Advanced Weapons and Equipment India Limited
Location: Central Government
Tender ID: GEM/2026/B/8147393
Category: Machinery & Equipment
Quantity: 3
Source portal: GeM — Government e-Marketplace

Key terms of this bid

Read from the GeM bid document on 12 Oct 2026, 3:22 pm IST. The document below is the final word.

EMD: ₹73,305; MSEs and startups may be exempt
Performance security: 5% ePBG; For 14 months
Bid type: Two Packet; Total value wise evaluation
Reverse auction: No
Offer validity: 180 days; From the bid end date
Experience & turnover relaxation: Yes, for MSEs and startups; With supporting documents
Purchase preference: MSE + Make in India

Documents sellers must upload

Certificate (Requested in ATC)
Additional Doc 1 (Requested in ATC)

Delivery location

Kanpur Nagar
Quantity 3 · Deliver within 90 days

Bid document

GeM bid document · GEM/2026/B/8147393

Official PDF: terms, eligibility, EMD, specifications and ATC

Open Download

See the full details with a free account

Eligibility: turnover, experience, MSE and startup relaxations
The documents sellers must upload
The GeM bid document, to read and download
Delivery locations and quantities

Takes a minute. The tender ID stays free for everyone.

How to bid

1Read the bid document on this page: the terms, eligibility, EMD, specifications and ATC (additional terms and conditions).
2Log in to your GeM seller account (register at gem.gov.in if you don't have one; it's free).
3Search BidPlus for bid number GEM/2026/B/8147393 and submit your offer before the closing time.

New to bidding? Read How to participate in a GeM bid, step by step: from finding the bid to getting paid, How to read a GeM bid document, section by section and GeM seller registration: documents, charges and steps.

Get tenders like this every morning

New machinery & equipment tenders, by email each morning and in your account. One district is free; all of India from ₹299 a month.

Create free alert See plans

Won a tender? Make GST bills and running bills, write letters on your letterhead and pay your workers, all in your account. See what's included

More from Department of Defence Production

All their tenders

Sky Blue Paint Enamel of Any Standard Brand as per IS Standard -IS: 3537 or Southcoate Synthetic En, N. C. Thinner as per IS: 5667 in 20 LTRS Packing., Wood Primer (IS3536: 1999) in 4 LTRS PKG/Tin.
Department of Defence Production · Central Govt
16 min left
Mon, 19 Oct, 9:00 pm
Cabin Arrangement: Providing Cabin arrangement-L shape with Glass of 9 mm thickness including door a, Pantry Room Partition: Partition for Pantry Room 4.5 ft width and 6 ft height Thickness of the Glass, Pantry Arrangement: Pantry Arrangement including SS Sink and SS Water Tap PVC Pipe Lines and Gra, Conference Hall at Second Floor: Establishing Conference Hall at 2nd floor: Fixing of existing glas
Department of Defence Production · Central Govt
16 min left
Mon, 19 Oct, 9:00 pm
H/WB/1110/S5B; Alt: WB-1110-S5-B; Terminal Block, MS27507B20 Backshell, 05592; Alt: S4628-52; Mounting Plate
Department of Defence Production · Central Govt
16 min left
Mon, 19 Oct, 9:00 pm
Tooling Set Consisting of (a) 1 N0. Turning Tool Holder to Sandvik Specn. PCLNL 2525-M12 L. H. or Equival
Department of Defence Production · Central Govt
16 min left
Mon, 19 Oct, 9:00 pm
Cartridge Recocking Defa
Department of Defence Production · Central Govt
16 min left
Mon, 19 Oct, 9:00 pm

Similar live tenders

Machinery & Equipment in Central Govt

Steel Rule, Hammer ball peen, Centre punch, Prick punch, Safety goggles clear glass Good quality, Marking table CI, Bench vice, Hammer copper brass, Combination set, Micrometer Outside, Micrometer Inside, Depth Gauge Micrometer, Vernie Caliper Outside Inside and Depth, Dial Vernier Caliper with metric, Vernier Bevel Protractor, Vernier Micrometer, Gauge Feeler, Gauge Radius Set, Centre Gauge, Screw Pitch Gauge, Drill Angle Gauge, Universal Dial Test Indicator Plunger Type, Vernier Height Gauge, Magnifying Glass, Plain Ring, Plug Gauge, Wheel Dresser Hunting on type with star cutter, Wheel Dresser Diamond, Screw Thread micrometer interchangeable, Morse Taper Plug Ring Gauge, Sine Bar with centers, Slip Gauge metric set, Twist drill, Drill twist set, Drill chuck, Tap Die, Reamer Adjustable, Parting Tool Holder with HSS blade, Tool Bits, Boring Tool holder, Dog Carrier, Angle Plate, Spirit Level, Tool Makers button, CombinationDrillCentreDrill, Oil Stone, Tap Wrench adjustable, Tool Bit
Technical Education Training and Skill Development Department West Bengal · West Bengal
10 days left
Thu, 29 Oct, 5:00 pm
Caliper outside 15 cm. spring, Caliper inside 15 cm. spring, Caliper 15 cm, hermaphrodite, Divider 15 cm spring, Scriber 15 cm, stud extractor EZY- out, set of 8, Universal scribing block 22 cm, V-block pair with clamps, 150 x 100 x 100 mm, Taps and dies complete set, 5, 6, 8, 10, 12 mm set of 5, File feather edge 15 cm smooth, Spanner 6-22 mm set of 8 pcs., Interchangeable ratchet socket set with a 12 mm driver, D.E. tubuler Box spanner set 6-25 mm set of 10 with Tommy bar, Clamp tool maker 5 cm and 7.5 cm set of 2, Hand reamer set, taper pin straight flute, Machine Reamr parallel, Helical flute 12-16 mm set of 5, Scraper flat 15 cm, Scraper Trianguler 15 cm., Scraper half round 15 cm., Chisel cold round nose 9 x 100 mm, Drill chuck with key, 12 mm, Pipe Wrench, 400 mm, Adjustable pipe Die set BSP cover pipe size 1 inch or 0.75 inch, Wheel dresser, star-dresser with holder, length 150 mm, diamond point, Wing compass 254 mm. or 300 mm., Different profile gauge, plate type for demo, metric standard, Knurling tool, Set of Diamond
Labour and Employment Department Gujarat · Gujarat
3 days left
Thu, 22 Oct, 12:00 pm
MS25441-1 - Crimp Tool (12 Ton), MS23002-01 - Crimping Die, MS23002-04 - Crimping Die, MS23002-08 - Crimping Die
Department of Defence Production · Central Govt
2 days left
Wed, 21 Oct, 2:00 pm
Supply of Dumb Bell shaped specimen cutting die and Tear resistance specimen cutting die for NIRT
Rubber Board · Central Govt
4 days left
Fri, 23 Oct, 2:00 pm
Scraper flat 150 mm, Scraper triangular 150 mm, Scraper half round 150 mm, Knurling tool, Diamond, straight and Diagonal, Lapping plate Dia. 6 inch, Drill gauges Letter drill gauge A to Z, Drill gauges Number drill gauge 1 to 60, Pipe threading die with handle Ratchet type Die head of 0.5 inch, Pipe threading die with handle Ratchet type Die head of 0.75 inch, Pipe threading die with handle Ratchet type Die head of 1 inch, Damaged old spur gear, to fit 50mm dia. Shaft, Bearing different types, each type of diameter 25mm min
Labour and Employment Department Gujarat · Gujarat
24 days left
Thu, 12 Nov, 3:00 pm
Assy D Shackle, Assy Bow Shackle, Die for D Shackle, Die for Bow Shackle
Department of Defence Research & Development · Central Govt
2 days left
Wed, 21 Oct, 1:00 pm

7 days left

Mon, 26 Oct, 2:00 pm

Bid document