Supply and Fitment of Pressure Vessel, Supply and fitment of fresh water Hydrophore Pump, Supply and fitment of automatic control panel cum motor starter, supply and fitment of pressure switch, Supply and Fitment of Safety Relief Valve, Supply and fitment of Pressure Gauge, Supply and fitment of Isolation Valves, Supply and Plumbing of Piping network, Supply and Fitment of Water Tank, Installation and Commissioning

by Department of Military Affairs

Published
Tue, 29 Sept
1:01 pm
Bid submission closes
Tue, 20 Oct
9:00 am· 20 days left

Key terms of this bid

Read from the GeM bid document on 30 Sept 2026, 2:54 am IST. The document below is the final word.

EMD: Not required
Performance security: Not required
Past performance: 30%; Of bid quantity supplied before
Bid type: Two Packet; Total value wise evaluation
Reverse auction: Yes; After technical evaluation
Offer validity: 180 days; From the bid end date
Experience & turnover relaxation: Yes, for MSEs and startups; With supporting documents
Purchase preference: MSE + Make in India

Documents sellers must upload

Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
Compliance of BoQ specification and supporting document

Delivery location

PUNE RURAL
Quantity 1 · Deliver within 30 days

Tender details

Organisation: Ministry of Defence › Department of Military Affairs
Location: Central Government
Tender ID: GEM/2026/B/8019769
Category: Machinery & Equipment
Quantity: 52
Source portal: GeM — Government e-Marketplace

Bid document

GeM bid document · GEM/2026/B/8019769

Official PDF: terms, eligibility, EMD, specifications and ATC

Open Download

How to bid

1Read the bid document on this page: the terms, eligibility, EMD, specifications and ATC (additional terms and conditions).
2Log in to your GeM seller account (register at gem.gov.in if you don't have one; it's free).
3Search BidPlus for bid number GEM/2026/B/8019769 and submit your offer before the closing time.

New to bidding? Read GeM seller registration: documents, charges and steps, How to read a GeM bid document, section by section and GeM reverse auction: how bid to RA works, who gets in and how L1 is decided.

More from Department of Military Affairs

All their tenders

Revenue Based Services - H1 Evaluation - Disposal of UNSV/scrap items
Department of Military Affairs · Central Govt
Today
Wed, 30 Sept, 9:00 am
Today
Wed, 30 Sept, 9:00 am
Revenue Based Services - H1 Evaluation - Disposal of UNSV/scrap items
Department of Military Affairs · Central Govt
Today
Wed, 30 Sept, 9:00 am
Today
Wed, 30 Sept, 9:00 am
Eastern Naval Command Oval Creast Acryllic Metallic Golden Frame for Entrance of Pavillion End Command Stadium Under Ins Satavahana Including Installation, Metallic Brass Body Letter Enc at the Entrance of Pavillion End Command Stadium Under Ins Satavahana Size 1.5 FT 3D Laser Cut Ex Finish Including Installation, Proliene 3D Cut Letter Blass Metallic Command Stadium at the Entrance of Pavillion End Command Stadium Under Ins Satavahana Size 1.5 FT 3D Laser Cut Ex Finish Including Installtion, Dispenser Machines Automatic for Liquid Disinfectant Soap in the Cleansing Area at the Command Stadium, SS Metallic Cleansing Paper Dispenser Machine Puller for Cleansing Area at the Command Stadium, Electric Hand Dryer Automatic Equipment for Cleansing Area at the Command Stadium, Frilled Tailored Custom Made White Covers for Efficiency at the Common Area Studio Workshop Pip Area, Hand Towels for Cleansing Area at the Command Stadium, Safety Locker for Stowage of Classified Key and Items for Exo Cabin 15 LTR Capacity Wall Mount
Department of Military Affairs · Central Govt
Today
Wed, 30 Sept, 9:00 am
Today
Wed, 30 Sept, 9:00 am
Repair of Scaled (Acrylic) Model (Compartment-7)
Department of Military Affairs · Central Govt
Today
Wed, 30 Sept, 9:00 am
Today
Wed, 30 Sept, 9:00 am
Professional Painting Service - Metals; NA; Vehicles
Department of Military Affairs · Central Govt
Today
Wed, 30 Sept, 9:00 am
Today
Wed, 30 Sept, 9:00 am

Similar live tenders

Machinery & Equipment in Central Govt

Life raft with Cradle - SOLAS Pack-A, Painter, Manually controlled exterior light, Manually controlled interior light, Buoyant rescue quoit, Knife - Non folding type, Buoyant bailer, Sponges, Sea-anchors each with a shock resistant, Buoyant paddles, Tin openers, Scissors, First aid outfit, Whistle, Rocket parachute flares, Hand flares, Buoyant smoke signal, Waterproof electric torch, Radar reflector, Daylight signaling mirror, copy_life-saving signals_waterproof card, Food ration, Fresh water in accordance with LSA, Rustproof graduated drinking vessel, Anti-seasickness medicine sufficient, Thermal Protective Aids-not less than10 percent, Repair outfit_repairng puncturs_buoyancy, Topping up pump or bellows, Single arm slewing davit of SOLAS and LSA, Automatic Release Hook_Life Raft davit, OBS_2 years exploitation_Life Raft Davit, Inst Tools, test eqpt and IM_Life Raft Davit, Commissiong Tools and spares_Life Raft Davit, Ser_Inst and STW, FAT, HAT and SAT_Life Raft Davit, Training_Ships Crew_Davit oprtn and Maintnc, Documentation Hard Copy_Life Raf
Department of Defence Production · Central Govt
6 days left
Tue, 6 Oct, 12:00 pm
6 days left
Tue, 6 Oct, 12:00 pm
Automatic Pressure Modification Device (Knorr Design) for Air Brake Wagon Having BMBS .Specification :- (I) as per Rdso Specification No. WD 23-BMBS-2008 (Rev. 1) with Amendment No. 1 of Sept 2016. (II) as per Rdso DRG. No. WD-08096-S-01, Alt. 2. (III) as per Kbi Part No. 1.3.5114 (IV) Suitable to Fitment of Air Brake Wagons Having BMBS(Knorr Design)
Ministry of Railways · Central Govt
6 days left
Tue, 6 Oct, 11:30 am
6 days left
Tue, 6 Oct, 11:30 am
PUMP STATION ASSY one to one fitment to part no. 22337000153, PRESSURE GAUGE one to one fitment to part no. 270768, CONTROL VALVE one to one fitment to part no. 003050, SOFT PARTS KIT one to one fitment to part no. 275383, HOSE REEL ASSLY one to one fitment to part no. 6980010002, PRESSURE GAUGE one to one fitment to part no.H222417041, FIVE INJECTORS WITH MANIF one to one fitment to part no. 6640010503,04 INJECTOR WITH MANIFOLD one to one fitment to part no. 6640010403, THREE INJECTOR WITH MANIFOLD one to one fitment to part no. 6640010303, TIMER GN 50A one to one fitment to part no. 6162010023
COAL India Limited · Central Govt
3 days left
Sat, 3 Oct, 6:00 pm
3 days left
Sat, 3 Oct, 6:00 pm
Pressure booster pump set 0.5 HP (0.37 KW ) with automatic pump controller etc.
Ministry of Railways · Central Govt
16 days left
Fri, 16 Oct, 2:00 pm
16 days left
Fri, 16 Oct, 2:00 pm
Main Fire pump, Diesel Driven Pump, Jockey Pump, Terrace Pump, Control Panel, Starter, M S Pipe, S and Fixing internal hydrant valve, Supply and Fixing of external yard hydrant valve, SFC of butterfly valve, S and Fixing of orifice plate, PITC non return valve, PITC of stainless steel Y strainer, S and Fixing of 15 M Hose pipe, S and Fixing first aid Hose Reel, S and Fixing 63 mm dia gun metal short branch pipe, S and Fixing of fire brigade connection, Foot valve, air vessel, pressure switch, pressure gauge, installation control valve of cast iron body, S and F of hose cabinet, Cutting holes, Supply of cable, Laying of cable, Laying
Department of Telecommunications (DOT) · Central Govt
22 days left
Thu, 22 Oct, 3:00 pm
22 days left
Thu, 22 Oct, 3:00 pm
EJ2030V 63162000047D Chilled Fresh Water Pump CHR 80 200, EJ2030V U92502851 PR Main Bilge Pump Centrifugal Self Priming Pump CV 125 250
Department of Military Affairs · Central Govt
Tomorrow
Thu, 1 Oct, 5:00 pm
Tomorrow
Thu, 1 Oct, 5:00 pm

20 days left

Tue, 20 Oct, 9:00 am

Bid document