Molygraph graphite grease colour black suitable for hydraulic rams, plungers, slides elevator cable lift guides, pantograph pans, cam and cam surfaces in break control valves of locomotives and as protective for steel wire ropes and certain antiseizer purpose in temperature & moderate climates operating temp range 20 to 150 degree Celsius. Worked penetration 265-295.

by Ministry of Railways

Bid submission for this tender has closed. Similar live tenders are listed below.

Published
Mon, 14 Sept
4:17 pm
Bid submission closes
Mon, 28 Sept
2:00 pm· Closed
Bid opening
Mon, 28 Sept
2:00 pm

Tender details

Organisation: Ministry of Railways
Location: Central Government
Tender ID: 107183860
Reference no.: 30265079
Category: Machinery & Equipment
Source portal: CPPP — Central Public Procurement Portal

How to bid

1Open CPPP — Central Public Procurement Portal and search for Tender ID 107183860 under Active Tenders (or Tenders by Organisation).
2Download the tender documents and any corrigenda. Check eligibility, EMD and the document fee.
3Register on the portal as a bidder with a Class 3 Digital Signature Certificate (DSC), then upload your bid before the closing time.

Similar live tenders

Machinery & Equipment in Central Govt

Graphite grease grade III
Ministry of Railways · Central Govt
14 days left
Mon, 12 Oct, 11:00 am
14 days left
Mon, 12 Oct, 11:00 am
Abrasive Rail Cutting Disc Wheel Stone, Acd Female, Acd Male, Telescopic Self Supported Alluminium Ladder, Emergency Inflatable Lighting Equipment, Banner Flag, Bosch Air Blower GBL620, Bush Cutter, Callipers Inside, Callipers Outside, Chain Saw, Chamfering Kit, Clip Applicator, Rail Thermometer, Digital Vernier Calliper, Dragon Torch, Dye Penetraion Kit, Feeler Gauge, Gauge Level, Gauge Level Pie for Points and Crossing, Grease Graphite IS 408 1981 Grade O, Green Flag, Hand Rammer, Hydraulic Jack Non Infringing Type 15 T, Laser Distance Meter, Measuring Tape 15 MTR, Measuring Tape 30 MTR, Measuring Tape 5 MTR, Mechanical Jack Non Infringing Type, Pan Mortar, Patrolman Stick, Pick Axe Beater, Plumb Bob, Powrah Spade, PVC Chair, Rail Drilling Tool Bit for for Rail Drilling Machine 18 MM, Rail Drilling Tool Bit for for Rail Drilling Machine 26.5 MM, Rail Drilling Tool Bit for for Rail Drilling Machine 31.5 MM, Rail Tong, Red Flag, Remote Control Hooter for Gang, Retro Reflective Tape, Rope, Shovel, Staff for Patrolman, Straight Edge 10 CM Long, Tarpaulin W
Railways Public Sector Undertakings · Central Govt
10 days left
Thu, 8 Oct, 3:00 pm
10 days left
Thu, 8 Oct, 3:00 pm
Grease Graphite(V2) Conforming to IS 508
Indian Railways · Central Govt
25 days left
Fri, 23 Oct, 4:00 pm
25 days left
Fri, 23 Oct, 4:00 pm
HRC fuse holder (fuse base with it s carrier) conforming to IS:13703-1993 or latest with rated current - 32 A, rated voltage - 500 V AC, front connected type, Screw type terminals, provided with fixing hole at centre of fuse base(for mounting of fuse base).The fuse holder should be suitable for provision of offset blade tag fuse link. The product should be ISI marked. Colour : Black.
Ministry of Railways · Central Govt
15 days left
Tue, 13 Oct, 2:30 pm
15 days left
Tue, 13 Oct, 2:30 pm
Single Core Thin-Walled Electron Beam Irradiated Flexible Copper Cable, Size 1.5 SQMM, with Copper Conductor, Working Voltage Above 750V and Up to 1.8/3.0KV, Suitable for Use in Rolling Stock Application, AS PER RDSO SPECIFICATION NO. ELRS/SPEC/ELC/0019 REV. 4 OF FEB 2018. Note: The cable colour should be black and red, in equal quantities, and the length of each cable roll should be 500 meters
Ministry of Railways · Central Govt
8 days left
Tue, 6 Oct, 2:25 pm
8 days left
Tue, 6 Oct, 2:25 pm
Graphite electrodes of suitable tapered nipple, size 200 mm dia, Graphite electrodes of Size: 100 mm dia X 1300 mm length
Department of Defence Production · Central Govt
5 days left
Sat, 3 Oct, 10:00 am
5 days left
Sat, 3 Oct, 10:00 am

Tender details

How to bid

More from Ministry of Railways

Similar live tenders